SP Tools Australia
Welcome legend, Sign in or Register

Multi-Function Smart Tool with Wifi & Built-In Printer - 5 Tools in 1

Multi-Function Smart Tool with Wifi & Built-In Printer - 5 Tools in 1

List price: $3,685.00
You save: $686.00 (19%) Save 19%
In stock


The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.



  • Two test modes - Out-of-car Inspection and In-car Inspection
  • Analyses battery health and calculates the actual cold starting ability of the battery
  • Battery bar code scanning for rapid test setup
  • Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
  • Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
  • Built-in printing functionality provides instant hard copy test results

TPMS TESTER (Tyre Pressure Monitoring System)

  • Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
  • Ultra wide coverage - Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
  • Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
  • Reads tyre pressure data, including pressure, tyre temperature, battery status and more
  • Can read/copy/write sensor ID value.


  • Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
  • Compare pre- and post- repair reports and easily identify which DTC's are cleared and which remain unfixed
  • Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
  • Identifies which systems are installed on the vehicle
  • Views and captures (records) real-time Live Data and saves the data in text format
  • 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way - Text in list format, waveform graphs or in a merged graph for easy data comparison
  • Update vehicle diagnostic software and APK
  • Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
  • Able to run actuation test to access vehicle-specific subsystem and component tests


This module provides an easy dial to quickly access the most commonly performed service functions as follows:

  • Oil Reset Service
  • Electronic Parking Brake Reset
  • Steering Angle Calibration
  • ABS Bleeding
  • Gear Learning
  • IMMO Service
  • Injector Coding
  • TPMS (Tyre Pressure Monitor System) Reset
  • Battery Maintenance System (BMS) Reset
  • Diesel Particulate Filter (DPF) Regeneration
  • Electronic Throttle Position Reset
  • AFS (Adaptive Front-lighting System) Reset
  • AdBlue Reset (Diesel Engine Exhaust Gas Filter)
  • Gearbox Matching
  • Sunroof Initialisation
  • Suspension Calibration
  • EGR Adaption
  • Windows Calibration
  • Seats Calibration
  • Tyre Reset
  • Language Change
  • A/F Reset
  • Coolant Bleed
  • Transport Mode
  • NOx Sensor Reset
  • Stop/Start Reset


(Available as an attachment - SP61173*)

With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly


  • SP Smart Tool
  • Diagnostic cable - DLC
  • Battery cable clamps
  • USB Type-C cable
  • 12v auxiliary power outlet cable
  • OBD I adaptor box
  • Non-16pin adaptor cable kit
  • All Housed in a heavy duty Blow Mold Case


  • Operating system: Android 10
  • Memory: 4GB
  • Storage: 64GB
  • Screen: 5.99” Capacitive touch screen
  • Resolution:720 x 1440 pixels
  • Camera: Rear-facing 8.0MP camera
  • Wi-Fi: 2.4GHz/5GHz dual band
  • Battery: 4500mAh/7.6v
  • Working temperature: 0 to 45°c
  • Storage temperature: -10 to 60°c


  • DB15 Diagnostic connector
  • USB Type A port x 1 + USB Type C port
  • Circular connector for battery tester clamps
  • OBD-II, OBD-I (Includes adaptor cables)
  • Wi-fi internet connection

SP Automotive Speciality Tools - 12 Month Warranty
SP Automotive Speciality Tools are covered against manufacturing defects or faulty materials. This warranty does not cover overloading, abuse, misuse and normal wear and tear. All SP Automotive Speciality Tools are designed and manufactured for specific purposes and if not used for that intended purpose they will not be covered by the 12 month warranty. This 12 month warranty is in addition to what is covered in the Trade Practices Act (Aust), all state and territory laws and regulations and the Fair Trading Act (NZ). Tools that fail due to manufacturing defects or faults may be returned to a SP Automotive Speciality Tool authorised dealer for repair or replacement at the sole discretion of Austech Industries Pty Ltd.