SP Tools Australia
Welcome legend, Sign in or Register
Menu

Category Category

Engine

ENGINE SERVICE TOOLS

From an engine service to an engine rebuild, we have the specialised service tools required to save time and money when performing these repairs.
SP Tools provides tools for all major and minor engine service and repairs.

SEARCH THROUGH A SUBCATEGORY BELOW:

Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank...
In stock
+
$509.00
Add to wish list

Universal adaptor with rubber mounting strap allows all drill sizes to be quickly mounted to pump 3 Litres per minute with drill speed of 1,200...
In stock
+
$369.00
Add to wish list

Comprehensive test kit for both direct & indirect diesel injected cars Simple and easy to use Checks engine compression under cranking...
In stock
+
$399.00 $359.00
Add to wish list

Fast, no mess fluid removal Air operated, “no moving parts” fluid extraction unit Designed to vacuum fluids from inaccessible or confined areas...
In stock
+
$335.01
Add to wish list

A basic set for diesel work Tester has a pressure relief valve for releasing air & retesting A 16-1/2” wire reinforced hydraulic hose has a...
In stock
+
$309.00
Add to wish list

Easily removal and Installation of camshaft and crankshaft seals Compact puller with unique extracting hooks engage seal for quick removal...
In stock
+
$229.00
Add to wish list

Pinpoints low compression cause ie burnt valves, worn rings, etc Crank stopper locks engine in place to facilitate installation of timing...
In stock
+
$269.01 $229.00
Add to wish list

Designed to check engine oil pressure in both cars & trucks Easy to read dual scale gauge Complete with 24” (600mm) of oil proof hose with...
In stock
+
$209.00
Add to wish list

Checks cylinder compression from 0-300psi (0 to 21kg/cm2) Assembles to form either push in or screw in type testers Screw in adaptors...
In stock
+
$209.00
Add to wish list

This universal kit covers most single overhead cam engines, twin cam engines and quad cam engines Lock camshafts to hold valve timing during...
In stock
+
$205.00
Add to wish list

Securely holds the timing gear during removal or installation Prevents timing gear movement while the retaining bolt is removed Allows...
In stock
+
$229.00 $199.00
Add to wish list

Kit contains adaptors required to refill many sealed automatic transmissions Best suits use in conjunction with quick flow drill pump to quickly...
In stock
+
$199.00
Add to wish list

Quick & easy removal of truck hub oil seals Prevents damage to the bearing and hub Heavy duty construction with high leverage 28” (710mm)...
In stock
+
$229.00 $199.00
Add to wish list

Reduces service time Use where impact guns won’t fit Loosens and tightens bolts Recommended for use with impact sockets Produces up...
In stock
+
$232.00 $189.00
Add to wish list

Designed to measure return fuel flow on diesel vehicles up to 8 cylinders fitted with common rail injection system Identifies, worn, blocked or...
In stock
+
$185.00
Add to wish list

Used to clean/decarbonise injector seats when changing injectors Set of four diesel injector seat cleaners, centring pilot and T-handle...
In stock
+
$260.00 $179.00
Add to wish list

Suitable for use on multi valve petrol and diesel engines with deep-seated valves Universal jaw with 55-175mm capacity and 165mm v...
In stock
+
$175.00
Add to wish list

FEATURES Suitable for fast and safe removal, inspection or replacement of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes heavy...
In stock
+
$185.00 $159.00
Add to wish list

Thread: 5/8”UNF Hammer weight: 1.5kg (3.5lb)
In stock
+
$149.00
Add to wish list

Easy reading 2-5” gauge features colour coated quadruple calibrations 0-300psi 21kg/cm, 21bar & 2100kpa 13” durable rubber hose with 14mm/18mm...
In stock
+
$139.00
Add to wish list

Helps remove & replace drain plugs in hard to reach locations on differentials, gearboxes & engine sumps Set includes: Inhex Keys - 3/8”Dr...
In stock
+
$175.00 $129.00
Add to wish list

Small, fast & portable fluid extractor Operates with an air compressor Extraction is achieved using deep vacuum technology Designed to...
In stock
+
$129.00
Add to wish list

Aids in the quick and easy removal/installation of stretch fit belts Installs all Stretch fit belts Allows for the reuse of stretch fit belts...
In stock
+
$129.00
Add to wish list

Versatile hone for 50mm - 178mm diameter cylinders 100mm fitted stones - Medium 220 grit Knurled nut controls tension Flexible shaft for...
In stock
+
$109.00
Add to wish list

Multi-purpose syringe ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials Translucent...
In stock
+
$102.00
Add to wish list

Checks for leaky or defective parts in vacuum systems and mechanical fuel pumps
In stock
+
$86.00
Add to wish list

Suits oil filters up to Ø300mm Satin finish cast steel body with 3/8” and 1/2” sq drives Extra wide nylon webbing strap
In stock
+
$82.01
Add to wish list

Check fuel injector signal faults fast Simply disconnect injector harness and plug in noid Light Easy to use and fits a wide variety of...
In stock
+
$82.01
Add to wish list

4 x CamClamp Timing Gear Clamps 4 x CamClamp Bolt Extensions Use on single, twin and quad cam engines to hold valve timing during belt...
In stock
+
$129.00 $82.00
Add to wish list

Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank...
In stock
+
$72.00
Add to wish list

Suits: Suits: Toyota 4 cylinder (1800cc - 2000cc) (New Cars) Allion, Auris, Corolla Axio, Corolla Fielder, Corolla Rumion, Isis, Ist, Noah,...
In stock
+
$69.00 $59.00
Add to wish list

2.5’’ gauge with dual scale, 0-300psi, 0-21kg/cm2, 0-300psi Pressure relief valve allows repeated on-vehicle test Includes multiple adaptors to...
In stock
+
$89.00 $59.00
Add to wish list

Suits: Suits: Audi, BMW, Ford, Mazda, Toyota, VW, Porsche, Ford Focus (2004-2006) & Mercedes Benz - V6 & V8 Specifications:...
In stock
+
$59.00 $55.00
Add to wish list

Multi-purpose syringe ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials Translucent...
In stock
+
$51.00
Add to wish list

Highly accurate Large and easy to read dial Pressure scale: 0-100psi / 0-700kpa Gauge fitted with heavy duty rubber bumper 610mm long flexible...
In stock
+
$51.00
Add to wish list

Easily remove valve springs on most cars & light trucks Works with cylinder head on or off the engine The jaws grip the valve spring in...
In stock
+
$61.00 $50.00
Add to wish list

8” valve pinchers Universal jaw with 75-165mm capacity & 150mm throat depth Universal compressor with strong adjustable cam-action...
In stock
+
$61.00 $49.00
Add to wish list

Suits: Hyundai Kia Land Rover Range Rover Jaguar Specifications: Size: 15 flutes x 88.8mm x 3/8”Dr....
In stock
+
$49.01 $45.00
Add to wish list

Suits: Toyota (6 & 8 Cylinder): 2007-2008 V6, Corolla (2007-2009) 4cyl, Tundra (2007) 8cyl, Sequoia (2008) 8cyl, Land Cruiser (2008-2010) 8cyl,...
In stock
+
$49.01 $45.00
Add to wish list

100mm fitted stones - Medium 220 grit Stones suit: SP63038
In stock
+
$42.00
Add to wish list

Designed to easily identify metric and SAE thread pitch sizes Range: 0-25 to 6mm Pitch: 4 to 62
In stock
+
$42.00
Add to wish list

Suitable for safe removal of oil and grease seals found in automotive drives and transmissions without damage to seal or surrounding casting...
In stock
+
$40.00
Add to wish list

Adjustable serrated jaws lock into position providing maximum grip on "oily" oil filters Made from heavy duty hardened steel Comfortable dipped...
In stock
+
$49.01 $39.00
Add to wish list

1/2” Square Drive or Hex Drive Suits Oil Filters Ø60mm – Ø100mm
In stock
+
$47.00 $39.00
Add to wish list

2 x CamClamp Timing Gear Clamps 2 x CamClamp Bolt Extensions Use on single, twin and quad cam engines to hold valve timing during belt...
In stock
+
$52.00 $39.00
Add to wish list

Suits: BMW: 335i 3.0L Twin Turbo, 535i 3.0L Twin Turbo, 3 Series (E90) & X6 3.0L Twin Turbo Volvo: All Models (1999 - 2008) excl. 2005 40...
In stock
+
$39.00 $35.00
Add to wish list

Designed to hold the camshaft pulley stationary while loosening & tightening the centre shaft bolt Fixed distance 54 - 120mm
In stock
+
$35.00
Add to wish list

Suits: Mercedes Benz Smart Car Specifications: Size: Hex x 27mm x 3/8”Dr. Use torque 25Nm ± 5Nm Chrome Finish...
In stock
+
$39.00 $33.00
Add to wish list