SP Tools Australia
Welcome legend, Sign in or Register
Menu

Category Category

Engine

ENGINE SERVICE TOOLS

From an engine service to an engine rebuild, we have the specialised service tools required to save time and money when performing these repairs.
SP Tools provides tools for all major and minor engine service and repairs.

SEARCH THROUGH A SUBCATEGORY BELOW:

Thread: 5/8”UNF Hammer weight: 1.5kg (3.5lb)
In stock
+
$149.00
Add to wish list

Easy clip over design Simple push under fitting until hose releases 5/16”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8”
In stock
+
$14.00 $10.00
Add to wish list

Versatile hone for 32mm - 90mm diameter cylinders 50mm fitted stones - Medium 220 grit Knurled nut controls tension Flexible shaft for ease...
In stock
+
$26.00
Add to wish list

Designed to hold the camshaft pulley stationary while loosening & tightening the centre shaft bolt Fixed distance 54 - 120mm
In stock
+
$35.00
Add to wish list

Reduces service time Use where impact guns won’t fit Loosens and tightens bolts Recommended for use with impact sockets Produces up...
In stock
+
$232.00 $189.00
Add to wish list

Pinpoints low compression cause ie burnt valves, worn rings, etc Crank stopper locks engine in place to facilitate installation of timing...
In stock
+
$269.01 $229.00
Add to wish list

A basic set for diesel work Tester has a pressure relief valve for releasing air & retesting A 16-1/2” wire reinforced hydraulic hose has a...
In stock
+
$309.00
Add to wish list

Comprehensive test kit for both direct & indirect diesel injected cars Simple and easy to use Checks engine compression under cranking...
In stock
+
$399.00 $359.00
Add to wish list

Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank...
In stock
+
$72.00
Add to wish list

Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank...
In stock
+
$509.00
Add to wish list

FEATURES Suitable for fast and safe removal, inspection or replacement of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes heavy...
In stock
+
$185.00 $159.00
Add to wish list

Designed to measure return fuel flow on diesel vehicles up to 8 cylinders fitted with common rail injection system Identifies, worn, blocked or...
In stock
+
$185.00
Add to wish list

Used to clean/decarbonise injector seats when changing injectors Set of four diesel injector seat cleaners, centring pilot and T-handle...
In stock
+
$260.00 $179.00
Add to wish list

Universal adaptor with rubber mounting strap allows all drill sizes to be quickly mounted to pump 3 Litres per minute with drill speed of 1,200...
In stock
+
$369.00
Add to wish list

Versatile hone for 50mm - 178mm diameter cylinders 100mm fitted stones - Medium 220 grit Knurled nut controls tension Flexible shaft for...
In stock
+
$109.00
Add to wish list

100mm fitted stones - Medium 220 grit Stones suit: SP63038
In stock
+
$42.00
Add to wish list

Highly accurate Large and easy to read dial Pressure scale: 0-100psi / 0-700kpa Gauge fitted with heavy duty rubber bumper 610mm long flexible...
In stock
+
$51.00
Add to wish list

Designed to check engine oil pressure in both cars & trucks Easy to read dual scale gauge Complete with 24” (600mm) of oil proof hose with...
In stock
+
$209.00
Add to wish list

Multi-purpose syringe ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials Translucent...
In stock
+
$102.00
Add to wish list

Multi-purpose syringe ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials Translucent...
In stock
+
$51.00
Add to wish list

005’’-030’’ (0.127-0.762mm) Marked with equivalent metic/inch sizes Offset blades 100mm long x 13mm wide with 25 mm offset tips
In stock
+
$29.00 $19.00
Add to wish list

Offset blade for easy tappet clearance measuring 0.008, 0.010, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.019, 0.020, 0.025 & 0.026” blades...
In stock
+
$27.01 $15.00
Add to wish list

0.04-1.00mm Marked with metric sizes Hardened spring steel straight blades Straight blades 75mm long x 13mm wide
In stock
+
$20.00
Add to wish list

0.0015” – 0.025” Marked with equivalent Metric sizes Straight blades 85mm long x 13mm wide
In stock
+
$27.01
Add to wish list

0.0015” – 0.035” Marked with equivalent metric sizes Straight blades 85mm long x 13mm wide
In stock
+
$30.00 $19.00
Add to wish list

Small, fast & portable fluid extractor Operates with an air compressor Extraction is achieved using deep vacuum technology Designed to...
In stock
+
$129.00
Add to wish list

Fits E-3/8” & F-5/16” fuel lines Release locking coupling on 5/16’’ & 3/8’’ fuel lines
In stock
+
$27.01
Add to wish list

Used for removal & re-fitting tank sender moulding rings Range: 75-160mm Diameter Use with a 24mm Spanner Socket
In stock
+
$41.00 $30.00
Add to wish list

This universal kit covers most single overhead cam engines, twin cam engines and quad cam engines Lock camshafts to hold valve timing during...
In stock
+
$205.00
Add to wish list

For use when changing engine oils, transmission oils etc Resistant to chemicals such as oil, antifreeze and solvents Made from high-density...
In stock
$45.00 $29.00

Check fuel injector signal faults fast Simply disconnect injector harness and plug in noid Light Easy to use and fits a wide variety of...
In stock
+
$82.01
Add to wish list

Check fuel injector signal faults fast Simply disconnect injector harness and plug in noid Light Available in various sizes to...
In stock
$5.94

Suits: Toyota & Lexus (2006~) 4, 6 & 8 cylinder vehicles Prevents oil from gushing out of the housing when changing oil filters 900mm long...
In stock
+
$25.00
Add to wish list

Suits: Volkswagen 2.0 vehicles: Golf V 2.0T 2.5, Golf V (all) 2.0T, Jetta V (all) 2.0T & Passat B6 (all) 2.0T Prevents oil from gushing out of...
In stock
+
$25.00
Add to wish list

Helps remove & replace drain plugs in hard to reach locations on differentials, gearboxes & engine sumps Set includes: Inhex Keys - 3/8”Dr...
In stock
+
$175.00 $129.00
Add to wish list

Fast, no mess fluid removal Air operated, “no moving parts” fluid extraction unit Designed to vacuum fluids from inaccessible or confined areas...
In stock
+
$335.01
Add to wish list

Adjustable serrated jaws lock into position providing maximum grip on "oily" oil filters Made from heavy duty hardened steel Comfortable dipped...
In stock
+
$49.01 $39.00
Add to wish list

Suits: Mercedes Benz Smart Car Specifications: Size: Hex x 27mm x 3/8”Dr. Use torque 25Nm ± 5Nm Chrome Finish...
In stock
+
$39.00 $33.00
Add to wish list

Compact design great for confined areas Suits oil filters Ø58 mm to Ø95mm 3/8’’ Drive
In stock
+
$30.00
Add to wish list

Suits: GM Opel/Vauxhall 4 cyl, GM 2.2liter ecotech X10XE, X12XE, Y17DT, Y17DTL engines, Mercedes HGV’S e.g. OM364 & OM366 engines....
In stock
+
$39.00 $33.00
Add to wish list

Suits: Mercedes diesel engines: OM604,OM605 & OM606 BMW engines: M52 6-cyl, M60 8-cyl & M70 12-cyl Mini One Ford 6.0...
In stock
+
$34.00 $24.00
Add to wish list

Suits: Toyota (6 & 8 Cylinder): 2007-2008 V6, Corolla (2007-2009) 4cyl, Tundra (2007) 8cyl, Sequoia (2008) 8cyl, Land Cruiser (2008-2010) 8cyl,...
In stock
+
$49.01 $45.00
Add to wish list

Suits: Suits: Toyota 4 cylinder (1800cc - 2000cc) (New Cars) Allion, Auris, Corolla Axio, Corolla Fielder, Corolla Rumion, Isis, Ist, Noah,...
In stock
+
$69.00 $59.00
Add to wish list

Suits: Suits: Audi, BMW, Ford, Mazda, Toyota, VW, Porsche, Ford Focus (2004-2006) & Mercedes Benz - V6 & V8 Specifications:...
In stock
+
$59.00 $55.00
Add to wish list

Suits: BMW: 335i 3.0L Twin Turbo, 535i 3.0L Twin Turbo, 3 Series (E90) & X6 3.0L Twin Turbo Volvo: All Models (1999 - 2008) excl. 2005 40...
In stock
+
$39.00 $35.00
Add to wish list

Suits: Hyundai Kia Land Rover Range Rover Jaguar Specifications: Size: 15 flutes x 88.8mm x 3/8”Dr....
In stock
+
$49.01 $45.00
Add to wish list

1/2” Square Drive Suits Oil Filters up to Ø150mm Non slip nylon strap
In stock
+
$20.00 $16.00
Add to wish list

Suits oil filters up to Ø300mm Satin finish cast steel body with 3/8” and 1/2” sq drives Extra wide nylon webbing strap
In stock
+
$82.01
Add to wish list