SP Tools Australia
Welcome legend, Sign in or Register
Menu

search

Category Category

Price Filter

$  –  $

  • ‎$0
  • ‎$2999
Reset

Speciality Tools, Workshop & Lighting

SPECIALITY TOOLS, WORKSHOP & LIGHTING

SP Speciality tools are the tools of choice for vehicle repair. It is our primary goal to make repairs easier and faster, therefore more economical. To achieve this we constantly strive to develop new and innovative speciality tools to keep pace with an ever changing automotive industry.

SEARCH THROUGH A SUBCATEGORY BELOW:

Newest Items First
24 Per Page
Camshaft Pulley Remover/Installation Kit
Designed to hold the camshaft pulley stationary while loosening & tightening the centre shaft bolt Fixed distance 54 - 120mm
In stock
+ −
$35.00
Add to wish list
Steering Wheel Puller
Heavy duty design 2 Hole yoke suits most steering wheels Includes 1/4”, 5/16” & 3/8” M8 bolts
In stock
+ −
$41.00
Add to wish list
Steering Wheel Puller Set - Heavy Duty - 7pc
Two-leg puller with two pairs of legs & two thrust caps Includes yoke, thrust bolt For use on GM & Ford vehicles
$104.01
Out of stock Add to wish list
Pitman Arm Puller
Designed for the removal of pitman and idler arms on vehicles fitted with linkage steering systems Ideal for passenger vehicles and light...
In stock
+ −
$57.00
Add to wish list
Tie Rod End Puller & Pitman Arm Puller
High quality alloy steel for durability and performance Easily removes pitman arms from most cars and trucks Made for heavy duty applications...
In stock
+ −
$48.00
Add to wish list
Pulley Puller
For removing alternator and power steering pulleys
In stock
+ −
$46.00
Add to wish list
Wrack Wrench - Heavy Duty
33mm - 41mm diameter wrack ends Suits multiple wrack ends and sizes Hex drive, round with two flats, round with no flats
In stock
+ −
$72.00
Add to wish list
CV Band Pliers
Offset cutter designed for easy removal of stainless steel CV joint clips and hose clamps without damaging the boot or hose Profiled jaws prevent...
In stock
+ −
$49.01
Add to wish list
CV Boot Clamp Banding Tool With Cutter
For installing band style clamps that require the tensions to be maintained while the band is locked into place Built in cutter & winding...
In stock
+ −
$86.00
Add to wish list
Bearing Race & Seal Driver Set - 10pc
Design allows operator to install bearing cases & seals without damage Ideal for installing wheel bearing outer races 39.5mm – 81mm
In stock
+ −
$170.01
Add to wish list
Bearing Packer (Cup Style)
Self-contained, saves time and can be used anywhere No air line or grease gun required Packs 50-60 bearings without refilling Transparent,...
In stock
+ −
$79.00
Add to wish list
Universal Bearing Packer
For use with grease guns, the design incorporates grease nipple at one end which easily adapts to the grease gun coupler For bearings in cars,...
In stock
+ −
$35.00
Add to wish list
Macpherson Strut Spring Compressor Set - 2pc
Allows you to compress the external coil springs on conventional MacPherson style struts to replace shock absorbers, spring sets and repair bent struts...
In stock
+ −
$145.00
Add to wish list
Coil Spring Compressor Set - 2pc
Carbon steel, hardened lead screws and cast jaws Wrap over coil claws for extra safety Suitable for use where space under wheel arch is limited...
In stock
+ −
$129.00
Add to wish list
Pry Bit Socket Set - 2pc
3/8”Dr x 45mm Long 5x7mm & 5.5mm x 8.2mm Pry Bit (Double “D”) Sockets are used on semi-strut clamp castings fitted to Audi, VW, BMW, Citroen, Ford,...
In stock
+ −
$29.00
Add to wish list
Locknut Socket - 54mm Nissan
For use on front wheel adjusting nuts Suits most popular 4 wheel drive hub nuts eg. Nissan Thin wall - High strength 1/2” drive...
In stock
+ −
$59.00
Add to wish list
Locknut Socket - 55mm Toyota
For use on front wheel adjusting nuts Suits most popular 4 wheel drive hub nuts eg. Toyota Thin wall - High strength 1/2” drive...
In stock
+ −
$59.00
Add to wish list
Save 20%
Master Puller Set
Ideal for pulling harmonic balancers, steering wheels, vibration dampers, crankshaft pullers and gears Capable of handling almost every 2 or 3 way...
In stock
+ −
$205.00 $165.00
Add to wish list
Harmonic Balancer Puller
Removes balancers, steering wheels, pulleys and/or gears with tapped holes Floating swivel helps prevent damage to shaft end 4 slots in...
In stock
+ −
$72.00
Add to wish list
Save 7%
Bearing Separators - Individual
Available in 4 sizes: 10-30mm, 30-50mm, 50-75mm & 75-105mm Designed to remove bearings & gears where access is available behind the item Can...
In stock
$59.00 $55.00
Select options Add to wish list
Gear Puller & Bearing Splitter Set - 14pc
Aids in the removal of pulleys, gears and steering wheels Separates ball bearings Drop forged, heat treated steel attachments Hardened and...
In stock
+ −
$195.00
Add to wish list
Gear Pullers - 2 Jaw Reversible - Individual
Available in 3 sizes: 75mm, 100mm & 200mm Easily remove gears, pulleys, bearings, sprockets and flywheels from shaft without damage Inside &...
In stock
$39.00
Select options Add to wish list
Gear Pullers - 3 Jaw Reversible - Individual
Available in 4 sizes: 75mm, 100mm, 150mm & 200mm Applies even pressure to easily remove gears, pulleys, bearings and flywheels from shaft without...
In stock
$69.00
Select options Add to wish list
Wiper Arm Removal Tool - Universal
Adjustable, compact and light, easy to use Prevents damaging wiper arm Cross-piece special for wiper featuring a nozzle
$69.00
Out of stock Add to wish list
1 - 8  Prev
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Next